The working principle and structure of the solid-liquid separator:

The main body of the inclined screen solid-liquid separator is a wedge-shaped round steel precision stainless steel plane filter surface. The wastewater to be treated is evenly distributed to the surface of the inclined screen through the overflow weir. Because the screen surface is small and smooth, the gap on the back is large, the drainage is smooth, and it is not easy to block; solid The material is intercepted, and the filtered water flows out from the gap of the sieve plate. Under the influence of hydraulic force, the solid material is pushed to the lower end of the sieve plate to be discharged, so as to achieve the purpose of solid-liquid separation.

Slanted screen solid-liquid separation can reduce the concentration of suspended solids in water and reduce the processing load of subsequent processes. It is also used in solid-liquid separation and recovery of useful substances in industrial production. It is an excellent device for filtering or recovering suspended solids, suspensions, sediments and other solid or colloidal substances.

What are the advantages of a solid-liquid separator?

Practicality: The separation speed of slag liquid is fast, the moisture content after separation is between 50%-60%, the slag content and water content can be adjusted, and it can be used for feed with different ingredients (grass, concentrated feed, etc.), easy to transport, and the solid is especially suitable for fish Feed ingredients and organic fertilizers.

Innovation: strong decontamination ability, no clogging, easy to clean. After treatment, the solid content, chemical oxygen consumption, total oxygen consumption and nitrogen and phosphorus removal rate of feces and urine can be between 70-95%.

Durability: The stainless steel of the frame, screen frame, and screen has been treated with anti-rust, corrosion-resistant, high strength, and long service life.

Economy: high degree of automation, low power consumption and low price. The operation is simple, just press the start and stop button.

The solid-liquid separator can be used as a treatment equipment for animal manure such as chickens, cattle, and horses, and can also be used as a slag-liquid separation equipment for high-concentration organic sewage such as wine tanks, residues, starch residues, sauce residues, and slaughterhouses. The processing range is very wide, which is one of the important reasons for its popularity.

The main body of the solid-liquid separator is made of high-quality stainless steel, and the main parts are made of alloy products through special processing. The equipment occupies a small area and is an ideal equipment for large cattle farms, which can greatly improve the efficiency of solid-liquid separation. However, there are strict requirements on the drainage technology, environmental characteristics, capacity and structure of the septic tank, and the gap of the drainage ditch.

The solid-liquid separator has a high degree of automation, simple operation, convenient maintenance, strong daily processing capacity, low energy consumption, and is suitable for continuous operation. Its top parts are made of stainless steel, weigh nearly half a ton, and are compact. It is an ideal solid-liquid separation equipment for large farms, which can greatly improve the efficiency of solid-liquid separation.

How to maintain the solid-liquid separator?

When using the solid-liquid separator, overload operation is prohibited, which will not only increase the wear of the solid-liquid separator, but also reduce work efficiency. If the solid-liquid separator is abnormal during operation, it should be shut down immediately. It is strictly forbidden to work with faults, and the operation can only be continued after troubleshooting.

The key to maintaining the working effect of the solid-liquid separator is to do a good job in daily maintenance measures. Therefore, pay attention to the maintenance of the solid-liquid separator at ordinary times, and have correct operation methods and skills in daily work to avoid aggravating the wear and tear of the solid-liquid separator due to operational errors.

Regular maintenance of various components can greatly improve the service life of the components and reduce damage. Regularly add lubricating oil to the components that need to be lubricated to ensure a good lubrication effect and reduce the wear of the solid-liquid separator.

If your company wants to establish a business relationship with us, please briefly describe the cooperation intention and send an email to：chuantaiscrewpress@gmail.com