Cow Dung Processor Solid Liquid Separator Screw Press

Features of cow dung press dehydrator:

1. The cow dung press dehydrator has the characteristics of small size, low speed, simple operation, convenient installation and maintenance, low cost, high efficiency, fast investment recovery, and no flocculant added.

2. Long service life. This machine adopts high-strength helical shaft, corrosion-resistant alloy double-helical blades and screen, and adopts manganese treatment, which is twice the service life of other similar products.

3. High dehydration rate. The mother liquor used for fermentation is subjected to solid-liquid separation, and the separated biogas residue has a moisture content within 30-40%, and the solid-liquid separation of feces.

4. Widely used. It can separate high-concentration organic sewage such as chickens, cattle, horses and various intensive farms, distiller’s grains, medicine residues, starch residues, sauce residues, and slaughterhouses.

The cow dung press dehydrator is mainly composed of a frame, a screw, a reducer, a feed port, and a feed pipe. After the material slag to be processed enters the feed port, the waste slag is compressed and dried under the squeezing force of the screw of the extruder, and the separated water enters the sump, and is discharged into the sewer or grid through the outlet connected to the bottom of it. front pool. The dry slag is discharged through the discharge pipe and enters the container.

The principle of the cow dung press dehydrator is introduced in detail:

After the equipment starts to operate, the high-humidity material to be dehydrated is evenly input from the feed box, and then moves radially along the screw shaft under the pressing force to adjust the pressing force of the back pressure resistance device to complete the high-humidity dehydration operation. The waste water will be discharged from the drain according to the filter, and the dehydrated material will be discharged from the outlet.

The main function of the cow dung press dehydrator is solid-liquid separation, which can be used for harmless treatment of slag in pulp and papermaking, solid waste treatment, pulp slag pressing treatment, fruit and vegetable processing and other industries, and then use drying equipment.

The cow dung press dehydrator has the characteristics of high compressive strength, high pressure, screw press, no deformation, not easy to block, corrosion resistance, wear resistance, no rolling, and easy maintenance. The device can be applied independently, and multiple devices can also be applied to achieve a stronger effect. According to the adjustment of the working pressure of the gauze, the steam pressure is likely to change the working pressure effect of the raw material, and the dryness of the slag is adjusted, and the working pressure effect varies with the raw material.

The material selection of cow dung press dehydrator is very important. We always use stainless steel plates at the material level. The screw press machine is composed of feeding bin, pressing screw, spiral pipe, slag discharge pipe and driving machine equipment. After the waste residue or excessive consideration, it enters the spiral tube from the feed bin, and is separated and dried under the force of the pressing screw. The water squeezed out from the material is collected in the water receiving tank and discharged through the drain pipe. After the material is tightened, it is discharged through the slag discharge pipe, which can reduce the water content of waste residue and other dirt. The screw press machine is composed of drain pipe area, feeding area, screw conveying area and feeding area. The waste residue enters the feeding area, and the screw press is discharged after being compacted in the compacting area, and the waste water is discharged from the screen.