Common problems and solutions of solid-liquid separator:

Bearing is an important part in the work of solid-liquid separator, and it is also a part that often causes problems. The most common problem is overheating. If it is not handled in time, it will not only affect the discharge efficiency, but also twist the bearing. To solve this problem, we must first clarify the cause of the bearing heating, and then prescribe the right medicine: the concentricity of the main shaft tends to be large, and the bearing force is uneven, which is likely to cause bearing heating.

When the machine is overloaded or overloaded, the stress on the spindle exceeds its own bearing level, which will cause the bearing to heat up. If the bearing lubricating oil is insufficient or the lubricating oil is insufficient, the friction force will be large during operation, which will cause the bearing to heat up. The spraying phenomenon is very inconvenient for product collection, but strictly speaking, the spraying phenomenon is not the problem of the machine itself, but the reason why the material to be processed is too thin or uneven. If spraying occurs, first determine the condition of the material. If it is too thin, you need to add a flocculant to the material for flocculation, so that the dirt will condense into large particles, and then separate the solid and liquid; if the material is not uniform, you should use a mixer to stir the material first, which can solve the problem of spraying well. This is usually caused by a clogged filter. After the filter screen is clogged, the water cannot leak through the filter screen in time, thus separating from the material. In this case, it is necessary to check the condition of the filter screen and clean up the clogged part in time, instead of blindly increasing the pressure of the discharge port to force the water to filter, which is likely to cause excessive pressure and damage to the filter screen.

Technical performance of solid-liquid separator:

1. It is designed as a vibration separation method, with fast solid-liquid separation speed and large processing capacity. The aperture of the screen can be selected according to the slag-containing conditions and water conditions of different pig farms, and according to the different needs of the use environment and users' access to the Internet.

2. The design and material selection of the vibrating screen and its supporting columns are special, suitable for harsh environments with strong corrosion and high humidity, and low noise.

3. The screw conveying slag extrusion system is used to carry out secondary extrusion on the separated dung and dregs to reduce the water content of the dung and dregs. Before the dregs are discharged, an extrusion sewage discharge port is set to ensure that the water content of the separated dung and dregs is lower than 60%. At the same time, according to the user's breeding and sewage cleaning methods, the dry and wet can be adjusted. Make the dung dregs have no leakage of sewage and secondary environmental pollution in the process of packaging, transportation and use, and the performance is better than other similar products at home and abroad; Make dung residue reach better fermentation humidity.

4. The design of the automatic cleaning system solves the problem of feces clogging the screen and cleaning the dirt inside the equipment after shutdown, ensuring the normal and continuous operation of the machine.

5. The overall shell is made of stainless steel plate, the shape is simple and beautiful, the equipment occupies a small area, and the working environment is clean and tidy.

Compared with similar products at home and abroad, this product adopts vibration separation, screw slag conveying extrusion dehydration technology, organically combines vibration, slag conveying, dehydration and automatic flushing system, and has a novel structure; it has good separation effect, high production efficiency and stable operation. , Simple operation and so on. High product cost performance, the water content of solid dung after separation is less than 60%, the removal rate of suspended matter and organic matter in sewage is greater than 90%, and the comprehensive technical performance has reached the level of solid-liquid separation of livestock and poultry manure and similar domestic products.

If your company wants to establish a business relationship with us, please briefly describe the cooperation intention and send an email to：chuantaiscrewpress@gmail.com